Skip to main content
Dealer login Contact support
On this page

Step 4: Register Your IC Bunker Gateway, Pay & Add Cameras

Applies to IC Bunker Updated 7 min read

Bunker Quick Start · Step 4 of 6

Register the Gateway, Pay & Add Cameras.

Connect your Gateway to your site, purchase its subscription, discover compatible cameras and confirm they're streaming in Bunker.

Gateway registration Subscription checkout ONVIF camera discovery Live video verification
Step 4 · Gateway, Subscription & Cameras 4 of 6
1 Register Gateway Connect the device to the site
→
2 Purchase Subscription Pay for the Gateway
→
3 Add Cameras Discover, authenticate and verify

Register the Gateway.

Registration connects the physical Gateway to your site. Make sure it has been powered on for at least five minutes before beginning.

Is an installer helping you?

They can guide you, but do this step yourself, signed in to your own account. Registering the Gateway is where you accept its Firmware License, so it should be you. Your installer can then help you check each camera in Live View.

01

Open the Gateway setup wizard

From your site, navigate to Gateways → Add New → Get Started.

Screenshot 2026-11-16 at 10.04.58 AM.png

Add New Gateway · Select Get Started to begin the registration process.
02

Enter the Gateway ID 

Select the field and type the Gateway ID from the IC Bunker sticker on the bottom of the Gateway. It starts with AZNG- and looks like AZNG-XXXX-XXXX. Do not use the long serial number on the box. Tick I agree to the Firmware & Device Software License, then select Submit to begin registration.

Screenshot 2026-11-16 at 10.04.58 AM.png

Enter Gateway ID · Use the Gateway ID from the IC Bunker sticker on the bottom of the Gateway, not the serial number on the box.
03

Wait for Gateway confirmation

Bunker displays Discovery in Progress, followed by Confirming Your Gateway. Remain on the screen while registration completes.

90 Sec Max

Stay on the screen during registration.

Registration is a timed handshake between the Bunker app and the Gateway and can take up to approximately 90 seconds. You do not need to press any buttons on the physical Gateway during confirmation.

04

Name the Gateway and finish

On Enter Gateway Name, provide a name for the Gateway. If left blank, the default name is Gateway. Complete the wizard to see Gateway Added!, then continue with Part 2 to purchase the subscription.

Important · Gateway ownership 

One Gateway can belong to only one site.

If the Gateway ID is already registered to another site, registration fails with There was an error registering your gateway. Please try again. If the Gateway is still active in another organization, Bunker shows This gateway is active in another organization. Contact IC Bunker support to move it. Moving a Gateway requires removing it from its current site first, and only the organization's Owner can remove a Gateway. A removed Gateway must be returned to IC Realtime before it can be registered again. Contact IC Realtime Support before removing any Gateway you intend to reuse. 

Purchase the subscription.

Your Gateway is billed at the plan you chose for the site in Step 3. Live view, recording, events and alerts start once the Gateway is paid for. Only organization Owners can make a purchase.

01

Select Purchase Subscription

On Gateway Added!, select Purchase Subscription. If your organization already has a subscription, the button reads Continue To Billing and opens the Subscriptions tab, where the Gateway is added to your current term.

02

Add your card

On Add your card, enter your payment card details and select Continue. Nothing is charged on this screen.

03

Review and confirm

On Review and confirm, check Total due today. If you have a promotion code, enter it under Promotion code (optional) and select Apply. The discount shows in Total due today before you pay.

04

Accept the subscription terms

Read the Subscription terms box, then tick I agree to the automatic renewal and cancellation terms above. The purchase button stays disabled until you do.

Important · Automatic renewal 

Review the renewal terms before payment.

The subscription renews automatically for another 1-year term unless cancelled. Each renewal is charged at your current annual rate increased 5% for each year since your original purchase, and the Subscription terms box shows your first renewal amount and date. We remind you at least 30 days before each renewal. You may cancel within 30 days of purchase for a full refund.

Using a promotion code? 

Discounts apply to the first year only.

A promotion code applies only to your organization's first purchase. Make sure the discount appears in Total due today before completing payment.

05

Start the subscription

Select Start 1-year subscription, renews for 1 year. When payment is complete, Bunker displays Purchase complete! with the options Go to Site and View My Plan.

Purchase complete screen with Go to Site and View My Plan

Purchase complete · Select Go to Site to continue and add your cameras.

Add your cameras.

Once the Gateway is registered and paid for, use Bunker to discover cameras on the local network and connect their video streams.

01

Open Add Available Cameras

From your site, open Cameras and select Add New. The Add Available Cameras page searches the local network on its own and lists the cameras it finds by IP Address and Camera Type. Each camera has an Add button. Select Refresh List to search again.

02

Add each camera

Select Add beside a camera and enter its Camera Name, Camera Username and Camera Password. Use the camera's ONVIF admin credentials. The Gateway signs in and sets up the video stream.

03

Verify live video

Open the site's Live View and confirm that each added camera is streaming successfully.

Camera discovery requirements 

Keep the cameras on the same network segment.

Cameras must be on the same network segment as the Gateway to be discovered. A Bunker1 or Bunker1 Mini supports up to 10 cameras, and a Bunker2 up to 16. When a Gateway is full, its cameras show Gateway full instead of Add. If a camera is discovered but cannot be added, or appears Offline after being added, refer to Troubleshooting.

✓

Gateway registered and paid for. Cameras streaming.

Once the Gateway has been added and paid for and you've verified each camera in Live View, the system is ready for the next step: inviting the people who need access.

Manage billing and subscriptions.

Owners can manage subscriptions, payment details and invoices directly in the Bunker web app under Manage Organization → Subscriptions.

Subscription and Billing page showing Add New Site, Update Payment Details and Invoices

Subscription & Billing · Available to organization Owners.
+

Add New Site

Create another site and choose its plan. A site is billed only for the Gateways you register on it.

↗

Upgrade or change a plan

In a site's Site Actions menu, select Upgrade To Premium or Downgrade To Standard. A change reprices every Gateway at that site. An upgrade is invoiced now, prorated for the rest of your term. A downgrade costs nothing today: it takes effect at the end of your term, and the site stays on its current plan until then.

✎

Update Payment Details

Change the payment card your organization pays with.

≡

View payment history

See the organization's past invoices and billing history.

↻

Cancel or turn renewal back on

Select Cancel Subscription to stop the next renewal. If you cancel within 30 days of purchase, you get a full refund and the subscription ends when the refund is issued. After 30 days, service continues until the end of the term you paid for, with no refund for unused time. Turn Renewal Back On remains available until the term ends (it needs a card on file). Renewal is charged five days before the term ends.

Billing access 

Only organization Owners can manage billing.

Subscription and billing controls are located within the Bunker application rather than a separate payment portal.

The subscription belongs to your organization, not to the card used at checkout. You can change the payment card at any time under Update Payment Details.

Was this article helpful?

Still stuck?

Chat with our support assistant at any time, and it can pass you to the support team. Or email us a request. It helps to have these ready:

Our support team answers by email. It helps to have these ready:

Model numberSerial numberFirmware or app versionWhat you have tried