Recorders
Initialize an NVR from the Local InterfaceThis guide explains how to initialize an NVR directly from the recorder using an HDMI monitor and USB mouse. Initializat...
Initialize an NVR from a ComputerThis guide explains how to initialize an NVR from a computer using either ConfigTool or a web browser. Initialization cr...
Recorders with IR supportRecorders that support IR control allow control of the unit without using a dedicated mouse, which may be preferable in...
How To Access Your NVRThis article will briefly go over the methods you can use to access your camera system's settings. This can be accomplis...
IR Remote Control This guide will walk you through pairing an IR remote to the recorder. 1.) You should first confirm the recorder's " Dev...
Adding IP Cameras To A Hybrid RecorderHybrid recorders have the ability to handle both coax camera signals and IP camera configurations. However, there is a l...
How do I get my recorder on the network?Below are the steps on how to properly connect your recorder to your network. Have your device initialized Have a data c...
P2P EnablingThis in-depth article will go over how to enable P2P for your surveillance device. If you are unable to access the devic...
Time Sync Settings (Setting Daylight Savings (DST) & GMT Offset)Time setting need to be set properly in order to search footage should something happen. If the time is off you can have...
Accessing WEB InterfaceThis needs to be simplified and divided between legacy and newer devices Almost all of our devices - recorders, cameras,...
Still need help?
Chat with our support assistant at any time, and it can pass you to the support team. Or email us a request. It helps to have these ready:
Our support team answers by email. It helps to have these ready:
Model numberSerial numberFirmware or app versionWhat you have tried