ICR/ICIP B2732Z, B3732Z, B4047
Depending on when the camera was manufactured, the device will have either a button or a copper contact point located under the left screw in the access hatch.
To perform the factory reset function, make sure the device is powered then press and hold the reset button for at least 15-30 seconds. The camera will reboot when the factory reset is successful.
To perform the factory reset function, make sure the device is powered then bridge the two copper contact points for at least 15-30 seconds. The camera will reboot when the factory reset is successful
Still stuck?
Our support team answers by email. It helps to have these ready:
Model numberSerial numberFirmware or app versionWhat you have tried