Skip to main content
Support

IPEG-E40F-IRW4

Applies to Cameras Updated 1 min read

To perform the factory reset function, make sure the device is powered then bridge the two copper contact points for at least 15-30 seconds. The camera will reboot when the factory reset is successful.unnamed.png

Still stuck?

Our support team answers by email. It helps to have these ready:

Model numberSerial numberFirmware or app versionWhat you have tried
Contact supportSoftware downloads
Eyeball Dome Cameras (IPMX-E20F-IRW2/ IPMX-E20F-IRB2/ IPMX-E40F-IRW2/ IPMX-E40F-IRB2) Fisheye Cameras (IPEL-F12-IRW1/ IPEL-F50-IRW1) IPEG-B20F/ B40F-IRW1/ IPFX-B20V-IRW2/ IPFX-B40V-IRW2 IPEG-B40F-IRW2 IPEG-D20F/D40F-IRW1 IPEL-E80F-IRW1 IPEL-M40F-IRW1 IPEL-M60F-IRW1