This article will instruct you on how to access the On Screen Display settings for IC Realtime coax cameras. The ITM 9000 v3 can help diagnose and troubleshoot cameras that are not working in a coax camera network.

Contents:

• Accessing OSD Menu
• Navigating OSD

Accessing OSD Menu

Go to Analog Camera Test

With the coax camera plugged into the tester, you will see this screen.

Press the SET button in the device.

In addition to troubleshooting PTZ coax commands, it can also access IC Realtime On Screen Displays.

Simply input:

• Protocol: ICR_Coax
• Baudrate: 9600

Then press IRIS+☑ to save these settings in the ITM-9000v3

You will now notice at the bottom of the screen there will be a OSD MENU selection.

Press IRIS+☑ to open the cameras OSD 

Navigating OSD

To navigate the OSD menu with the ARROW buttons on the ITM

• UP and DOWN will select the different options
• RIGHT to enter a menu or cycle an option
• LEFT is to go back