Skip to main content
Support

2 NIC NVR setup diagram

Updated 1 min read

This is the optimal setup for a 2 Network card NVR

 

In this setup the default network port is set to network port 1. Due to different network environments the setup may vary.

 

 

 

2_NIC_card_setup__1_.jpg

Still stuck?

Our support team answers by email. It helps to have these ready:

Model numberSerial numberFirmware or app versionWhat you have tried
Contact supportSoftware downloads
Changing Device IP's in a 4.0 NVR Changing IP Addresses Enabling Bridge mode on an Onboard PoE Recorder RJ-45 PinOut + Receptacle Diagram RJ45 Pinouts IC Now Pro - Server deployment types