A tripwire allows you to create an individual line or perimeter that when crossed sets off an event. These tripwires can be either unidirectional or bidirectional and depending on settings, these events can trigger recording, take a snapshot and forward it to a configured e-mail, or send a push notification to a mobile device running ICRSS Pro. Tripwires can also be used with PTZ cameras to track objects that cross the perimeter. Tripwires are commonly deployed around a property border or in front of gates.
Cameras are recommended to be mounted vertically at least 15ft. The wider the viewing angle the better IVS will operate. IVS can still work if mounted lower but it will not be as consistent
Specifically related to PTZ cameras, it is recommended to have the camera stationary for at least 3 minutes to calibrate, i.e. every time the camera moves it will need to sit in the same place for 3 minutes
The analytics have to recalibrate in high contrast situations, e.g. a door opens in a dark garage and light comes flooding in.
This recalibration usually takes a few seconds and the event may be missed. In situations like this, motion detection may be better to use
The size of the rule should be within 20-33% of the entire image. The wider the viewing angle, the larger the rule can be
Don’t draw rules along the edge of the image. The analytic system needs to be able to see objects coming and going and if the rule touches the edge of the image that makes this impossible
Tripwires can only be used with intrusion zones or other tripwires. It cannot be used with other IVS types
Still stuck?
Chat with our support assistant at any time, and it can pass you to the support team. Or email us a request. It helps to have these ready:
Our support team answers by email. It helps to have these ready:
Model numberSerial numberFirmware or app versionWhat you have tried