Skip to main content
Dealer login Contact support

RTSP Strings

Updated 2 min read

In this article we will go over using RTSP strings and when they may be helpful to use. While each manufacturer will have their own RTSP string, we will go over what ICRealtime will use in cases RTSP is needed. 

 

Provided below are example RTSP strings you will commonly use with ICRealtime recorders and cameras:

 

Main Stream

rtsp://user:pass@ip_address:554/cam/realmonitor?channel=1&subtype=0

Sub Stream

rtsp://user:pass@ip_address:554/cam/realmonitor?channel=1&subtype=1

 

ELIP Strings (For ELIP series cameras)

MJPEG:
http://192.168.1.108/cgi-bin/video.cgi?mode=1&camera=1

H264:
rtsp://admin:admin@192.168.1.108:554/h264

Sub Stream:

rtsp://admin:admin@10.10.10.51:554/h264-2

 

Using an RTSP string is advisable to assist with ONVIF compatibility. While RTSP can only send video and audio it helps by providing another type of stream to try if ONVIF compatibility does not work in the devices you are trying to use.  

Below is an example of adding in a camera using RTSP. You will need to use the "Manual Add" utilize RTSP strings.

3_Input_RTSP_string.PNG

Here is an example of an IP camera online on our system using the RTSP string. 

4_RTSP_add_method_is_online.PNG

Zero Channel Stream

Supported by EL NVRs and 16MP-MX and FX recorder units. You can view the local output of the recorder by adding+1 to the channel in the URL.
Example:

rtsp://user:pass@ip_address:554/cam/realmonitor?channel=17&subtype=0

For 16 channel units to display the local output via RTSP.

Was this article helpful?

Still stuck?

Chat with our support assistant at any time, and it can pass you to the support team. Or email us a request. It helps to have these ready:

Our support team answers by email. It helps to have these ready:

Model numberSerial numberFirmware or app versionWhat you have tried