Skip to main content
Support
On this page

How to enable/disable ports on an Engenius port switch

Updated 1 min read

Web UI Method

1) Once you have the device registered, click the switch

1.png

 

2) Click details

2.png

 

3) Click ports

3.png

 

4) Choose the port you want to configure, then click configure

4.png

 

5) Enable or disable the port then click apply. (The change may need a couple of minutes to apply)

5.png

 

Mobile Method

1) Once you have the device registered, click the switch

1.png

 

2) Click port settings

2.png

 

3) Click the drop-down arrow on the port you want to configure

3.png

 

4) Click configure

4.png

 

5) Enable or disable the port (The change may need a couple of minutes to apply.)

5.png

Still stuck?

Our support team answers by email. It helps to have these ready:

Model numberSerial numberFirmware or app versionWhat you have tried
Contact supportSoftware downloads
EnGenius ENH1350EXT Quick Start Guide Engenius Point to Point Setup Setting up EnGenius AP and Bridge (With Local Network) Setting up EnGenius AP and Bridge (Without Local Network)